|
|
|
|
AAT-432 is an acrylic latex based adhesive, non-flammable, and specifically formulated for the installation of rubber or vinyl cove base. AAT-432 is suitable for installations to almost any clean, dry, and structurally sound wall surface, and is water-resistant when cured. Apply adhesive directly to base or wall. Stay 1/8” away from top of base to prevent oozing. After placing base roll with a hand roller. Continue in like manner until all base has been placed. Roll toward previously installed section to insure a tight fit.
Uses: AAT-432 Acrylic Cove Adhesive is recommended for the following installations:
Materials:- Rubber Cove Base
- Vinyl Cove Base
Wall Surfaces:- Wood
- Plaster
- Plywood
- Brick
- Painted Walls
- Concrete
- Gypsum Drywall
432 Covebase Adhesive Specs
Warranty
AAT-432
Size: 4 Gallons per pail
Type: Rubber/ Vinyl Cove Base Adhesive
Pallet Size: 48 Pails
Approximate Coverage: (for 4" Base) 250 ln.ft./gallon
Recommended Trowel: 1/8" X 1/8" X 1/8" Sawtooth
|
|
|
|
|
|
|
